Pricing - 1 quart - $17.95 1 Gallon - $59.95 5 Gallons - $245

How to Use Fire'z Off

Applications: Use to treat most absorbent materials and surfaces such as uniforms, clothing, wood, pre-construction materials, furnishings, carpeting, packing materials, motor home interiors, holiday decorations and storage boxes for added safety against fire. Can be used on some synthetics, but it must be able to soak into the material being treated and bond with the fibers. Spraying the material is the easiest method.

One quart of of Fire'z Off is enough to treat 100 square feet of fabric material. Five gallons will treat 2000-2500 square feet, depending on the type of nozzle and applicator used. For wood, coverage is 100 square feet per quart.

Do not dilute - use 100%.

On construction materials that will be exposed to the elements, a sealer can be applied as a topcoat, which will improve the time of effectiveness. Topcoat can be either paint or a sealer. If using a clear sealer, you may want to wipe down the surface with a damp towel to remove any surface residue, otherwise the residue may lighten the appearance of the wood slightly. The only severe discoloration we have encountered has been with Minwax water-based polyurethane, where the surface residue turned white.

Available in one quart bottles with sprayers, 1 gallon jugs, 5 gallon pails, or 55 gallon drums.

Directions: Fire'z Off is easy to use. Just spray Fire'z Off on the item or surface being treated. Make sure the item gets completely wet. In bulk applications, you may also dip the items and allow to drip dry. In all applications, allow Fire'z Off to completely penetrate the item or surface. Allow material to dry completely. If you are using Fire'z Off to fire retard clothing and other fabrics, and plan to wash these items in the future, it is recommended that Fire'z Off be reapplied after washing, as the product's effectiveness will be diminished due to washing. It does not take a lot of Fire'z Off to treat a garment, so it can still be cost effective. Keep in mind that some industries require FRC to be labelled by the manufacturer, and will not accept garments treated at home.

Tips for Applying Fire'z Off Flame Retardant

• You can use nearly any type of applicator - garden sprayer, backpack sprayer, commercial sprayer, paint sprayer, brush, roller, etc. You can dip items into it, wring it out and allow to air dry.
  
• For fabrics, spray or dip. If dipping, wring out excess and allow to air dry. Do NOT use a high-heat drier. Spraying is the more economical and practical option.
  
• Curtains may be sprayed while still hanging up, or can be taken down and laid flat on the ground. Depending on the material, the additional weight of the liquid may make it very heavy, so exercise caution.
  
• On fabrics, if the Fire'z Off was allowed to pool, there may be some white, chalky residue form the mineral salts. This can most often just be brushed off. Fire'z Off will not stain or discolor fabric, wood or paper. If applying to a velour, velvet or damask-type material, you may want to spray the backside and allow to soak in; this will alleviate surface residue on the front side.
  
• You need to get the material WET - a light misting usually isn't enough. If the material doesn't allow that, then apply one or two extra light coats.
  
• Fire'z Off is thinner than water, and soaks in very quickly. It is non-soapy, although a few bubbles may appear, but it does not make the surface any slicker than water.
  
• Always keep in mind the surface that you are treating, and adjust your application accordingly.
  
  • Absorbency
    
  • Porosity
    
  • Weight and thickness
    
  • Natural vs. synthetic
    
  • Naturally occurring oils, like cedar shakes
    
  • Fire risk/exposure
    
    
• Paper also needs to get damp to be effective. For posters or other artwork, spray the back of the paper so it does not damage the inks and paints on the front.
  
• When dry, fabric and paper may be a little stiff, but can be worked back to suppleness without loss of fire retardancy.
  
• For fabric, one quart will treat approximately 100 square feet. One gallon will treat 400 square feet. Five gallons will treat 2000 square feet.
  
• Fire'z Off works best on natural materials that can absorb moisture - cotton fabric, wood, paper. It will work on most fabrics, even synthetics, but materials with a high plastic or polyester content are more difficult. Always test on a small portion if in doubt.
  
• Fire'z Off will NOT work on Styrofoam, plastic or laminates where the liquid cannot penetrate. For that, you will need something like an intumescent paint.
  
• Also not effective on silk plants, which are actually plastic. Plastic usually just melts and drips. The Fire' Off just sits on the surface - it has to get into the actual material to work correctly.
• For thatching (like a tiki hut) the leaves need to be soaked, preferably prior to installation. Some thatch contains a lot of oil which makes it water-repellant, but also flammable. Since Fire'z Off is water-based, standard application rates do not apply; you might want to look at an alternative product, like 1DS, or at least test a small amount first before applying to a large project.
  
• When applying with a sprayer, always use smooth, even strokes, and try not to overlap too much. A second application may be necessary depending on the material being treated. Testing a small sample is always advised.
  
• If the treated material is indoors, the treatment should last indefinitely. If it is exposed to the elements, we recommend some kind of sealer or topcoat. Once the topcoat wears off, you will need to re-treat. If it is fabric, like a uniform, we recommend re-treating after each washing.

Construction

• You can use nearly any type of applicator - garden sprayer, backpack sprayer, commercial sprayer, paint sprayer, brush, roller, etc.
  
• When using sprayer, a fan nozzle works well because it gives even coverage and is easy to see, and little is lost to wind.
  
• Construction: Fire'z Off may applied at the lumberyard, to create Fire Retardant Treated (FRT) Wood. Normally, FRT wood can command a 50-100% premium over regular wood, but Fire'z Off adds just pennies per foot to the cost.
  
• Construction: Fire'z Off may also be applied on site. Because it is non-toxic, no respirators are necessary, but you may want to use goggles and a simple mask. It's not toxic or irritating, but it doesn't taste good.
• When using for construction materials that will be exposed to the elements, we recommend applying the Fire'z Off first, letting it dry completely, then applying some type of topcoat or sealer. If using a clear sealer, then wipe the surface with a damp cloth to remove surface residue.
  
• When applying with a sprayer, always use smooth, even strokes, and try not to overlap too much. A second application may be necessary depending on the material being treated. Testing a small sample is always advised.
  
• One gallon will treat approximately 400 square feet. Five gallons will treat 2000 square feet.
  
• You need to get the material WET - a light misting usually isn't enough.
  
• Construction: we offer Fire'z Off in a green tint for construction projects using wood. This makes it a little easier to see where you have already treated, and leaves a light green sheen when dry. You have to be looking for it to really notice it. You can also add your own dye to the mixture without reducing effectiveness; something like RIT dye works pretty well.
  
  • Always keep in mind the surface that you are treating, and adjust your application accordingly.
    
  • Absorbency
    
  • Porosity
    
  • Weight and thickness
    
  • Natural vs. synthetic
    
  • Naturally occurring oils, like cedar shakes
    
  • Fire risk/exposure
• When applying to new roof deck, apply to underside before laying down. If applying to existing roof deck, go ahead and spray the top side - it will soak in. You can lay the felt down immediately after application. It dries quickly and discourages mold growth.

Working with Fire Marshals

• We have had very good relationships with fire marshals, but every one is different, and they have a lot of leeway in how they enforce codes. Find out as much as you can about how your fire marshal likes to operate.
  
• There is no single product that works on every surface and material. If there is any doubt, always talk to your fire marshal before purchasing product. Usually showing a marshal the product sheet with the testing info and the MSDS sheet is enough
• Sometimes they will set a lighter to whatever you've treated, to make sure it meets the code requirements.
  
• If you are in a Life Code 101 facility, you will need to keep records of what you have treated and the date treated.
  
• Types of things Fire Marshals want to see treated
  
• Drapes and other hanging fabrics
  
• Holiday/seasonal decorations
  
• Paper on walls
  
• Stage set flats and props
  
• Fabric panels on office cubicles
  
• Artificial greenery
  
• Log homes or un-treated exposed wood on structures, especially eaves
  
• Decking
• Some marshals may require that you use a third party to apply the retardant. Some states and/or cities have certification processes for fire retardant applicators. Some will accept somebody with construction industry experience, like a licensed/bonded roofer or a painter.
• RDR can provide to third party applicators
• certification to industry applicators
  
• a card with unique certification number
  
• a treatment certificate (in Word) that can be completed by applicator and given to the customer, which can be shown to the fire marshal or insurance company
  
• Supporting documentation like MSDS Sheet, Product Sheet and ASTM E-84 test results
• The information you are reading is part of the certification process

Insurance Companies

Some insurance companies will require material to be treated with fire retardants, in order to reduce their exposure and liability. They will often want a third party applicator to treat it and provide documentation.

Many insurance companies will offer discounts if provided evidence that material has been treated, especially construction materials. We have had success in getting discounts for treating roof decks, framing timbers, decks and eaves. There are standard deductions that can apply:

• Superior Materials
  
• Mitigation of Risk

Mention these, provide the documentation, and the homeowner can often receive discounts or 5-20%, depending upon the policy.